Language:
| Turbo Model | GT1549 |
| Vehicle OE No | PMF100360 |
| Model | 620 all trim levels |
| Engine | TCI/E |
| ETP # | OE # | Ref # | |
| CHRA | 435796-0010 | ||
| Bearing Housing | 433275-0002 | ||
| Shaft & Wheel | 433113-0004 | ||
| Compressor Wheel | 447778-0003 | ||
| Back Plate | 435824-0003 | ||
| Heat Shield | 434302-0001 | ||
| Nozzle Ring Assembly | NA | ||
| Turbine Housing | 434411-0001 | ||
| Compressor Cover | 434349-0001 | ||
| Actuator | 434133-0004 | ||
| Repair Kit and Components | |||
| Calibration Data | |||
| VSR Balance Calibration | 0.65G Max 0 -90,000rpm / 2.00G Max 90,000 -168,0 | ||
| T/hsg Angle | 140 | ||
| C/hsg Angle | 200 | ||
| Actuator Calibration 1 | 1.116 -1.185 = 1.00 | ||
| Actuator Calibration 2 | - | ||
| Actuator Calibration 3 | - | ||
| ETP No. | |
| Turbo OE | 452098-0001 |
| Bearing Housing OE | 433275-0002 |
| Ref | |
| VNT or Non-VNT | NON |
| Oil or Water Cooled | OIL |
| Oil Inter(II) | |
| Turbine Housing Diameter(I) | 68 |
| ETP No. | |
| Turbo OE | 452098-0001 |
| Shaft & Wheel OE | 433113-0004 |
| Ref | |
| Inducer Diameter(I) | - |
| Exducer Diameter(II) | - |
| Tip Height(III) | - |
| Journal Bearing Diameter(IV) | - |
| Comp Wheel Bore(V) | - |
| Number of Blades | |
| Type Of Shaft | - |
| ETP No. | |
| Turbo OE | 452098-0001 |
| Compressor Wheel OE | 447778-0003 |
| Ref | |
| Inducer Diameter(III) | 34.7 |
| Exducer Diameter(IV) | 49 |
| Tip Height(II) | 4.5 |
| Total Height(I) | 24.8 |
| Number of Blades | 6 |
| Flatback / Superback(Trim) | Superback |
| Shaft / Bore | 5.1 |
| ETP No. | |
| Turbo OE | 452098-0001 |
| Seal Plate & Back Plate OE | 435824-0003 |
| Ref | |
| Plate Diameter(III) | - |
| Plate Diameter(II) | - |
| Plate Diameter(I) | - |
| Plate Depth(IV) | - |
| Plate Diameter(V) | - |
| Flatback / Superback | - |
