Language:
| Turbo Model | GT1549 |
| Vehicle OE No | ERR6106 |
| Model | 220 & 420 D. SD |
| Engine | TCI/M |
| ETP # | OE # | Ref # | |
| CHRA | 433289-0007 | ||
| Bearing Housing | 435793-0002 | ||
| Shaft & Wheel | 433298-0004 | ||
| Compressor Wheel | 433256-0001 | ||
| Back Plate | 433254-0003 | ||
| Heat Shield | 434302-0001 | ||
| Nozzle Ring Assembly | NA | ||
| Turbine Housing | 434411-0004 | ||
| Compressor Cover | 434349-0006 | ||
| Actuator | 434133-0010 | ||
| Repair Kit and Components | |||
| Calibration Data | |||
| VSR Balance Calibration | 0.7G Max 0 -108,000rpm / 3.00G Max 144,000 -168, | ||
| T/hsg Angle | 140 | ||
| C/hsg Angle | 200 | ||
| Actuator Calibration 1 | 1.285Bar-1.337Bar = 1.00mm movement | ||
| Actuator Calibration 2 | - | ||
| Actuator Calibration 3 | - | ||
| ETP No. | |
| Turbo OE | 452151-0002 |
| Bearing Housing OE | 435793-0002 |
| Ref | |
| VNT or Non-VNT | NON |
| Oil or Water Cooled | OIL |
| Oil Inter(II) | |
| Turbine Housing Diameter(I) | 68 |
| ETP No. | |
| Turbo OE | 452151-0002 |
| Shaft & Wheel OE | 433298-0004 |
| Ref | |
| Inducer Diameter(I) | 41.5 |
| Exducer Diameter(II) | 33.8 |
| Tip Height(III) | 7.3 |
| Journal Bearing Diameter(IV) | 7.9 |
| Comp Wheel Bore(V) | 5.1 |
| Number of Blades | 9 |
| Type Of Shaft | Slender |
| ETP No. | |
| Turbo OE | 452151-0002 |
| Compressor Wheel OE | 433256-0001 |
| Ref | |
| Inducer Diameter(III) | 34.7 |
| Exducer Diameter(IV) | 49 |
| Tip Height(II) | 4.8 |
| Total Height(I) | - |
| Number of Blades | 6 |
| Flatback / Superback(Trim) | 50 |
| Shaft / Bore | - |
| ETP No. | |
| Turbo OE | 452151-0002 |
| Seal Plate & Back Plate OE | 433254-0003 |
| Ref | |
| Plate Diameter(III) | 50.00 |
| Plate Diameter(II) | 91.3 |
| Plate Diameter(I) | 111 |
| Plate Depth(IV) | - |
| Plate Diameter(V) | 9.3 |
| Flatback / Superback | - |
