Language:
| Turbo Model | GT2052LS |
| Vehicle OE No | PMF000090 |
| Model | MG ZT Turbo |
| Engine | K1800 16V |
| ETP # | OE # | Ref # | |
| CHRA | 433352-0052 | ||
| Bearing Housing | 434578-0015 | ||
| Shaft & Wheel | NA | ||
| Compressor Wheel | 436131-0005 | ||
| Back Plate | 701335-0003 | ||
| Heat Shield | NA | ||
| Nozzle Ring Assembly | NA | ||
| Turbine Housing | 717579-0006 | ||
| Compressor Cover | 724599-0005 | ||
| Actuator | 436806-0021 | ||
| Repair Kit and Components | |||
| Calibration Data | |||
| VSR Balance Calibration | 0.8G Max 0 -108,000rpm / 2.5G Max 108,000 -150,0 | ||
| T/hsg Angle | 183 | ||
| C/hsg Angle | 248 | ||
| Actuator Calibration 1 | 0.400 -0.440 = 1.00 | ||
| Actuator Calibration 2 | - | ||
| Actuator Calibration 3 | - | ||
| ETP No. | |
| Turbo OE | 731320-0001 |
| Bearing Housing OE | 434578-0015 |
| Ref | |
| VNT or Non-VNT | - |
| Oil or Water Cooled | - |
| Oil Inter(II) | |
| Turbine Housing Diameter(I) | - |
| ETP No. | |
| Turbo OE | 731320-0001 |
| Shaft & Wheel OE | NA |
| Ref | |
| Inducer Diameter(I) | - |
| Exducer Diameter(II) | - |
| Tip Height(III) | - |
| Journal Bearing Diameter(IV) | - |
| Comp Wheel Bore(V) | - |
| Number of Blades | |
| Type Of Shaft | - |
| ETP No. | |
| Turbo OE | 731320-0001 |
| Compressor Wheel OE | 436131-0005 |
| Ref | |
| Inducer Diameter(III) | 38.6 |
| Exducer Diameter(IV) | 52 |
| Tip Height(II) | 4 |
| Total Height(I) | 26 |
| Number of Blades | 6 |
| Flatback / Superback(Trim) | Superback |
| Shaft / Bore | 5.1 |
| ETP No. | |
| Turbo OE | 731320-0001 |
| Seal Plate & Back Plate OE | 701335-0003 |
| Ref | |
| Plate Diameter(III) | 53.00 |
| Plate Diameter(II) | 100.2 |
| Plate Diameter(I) | 124 |
| Plate Depth(IV) | 12 |
| Plate Diameter(V) | 10 |
| Flatback / Superback | Superback |
