Language:
| Turbo Model | TD025S2-06T4-2.3 |
| Vehicle OE No | 9662371080 |
| Model | S40 / V50 1.6 81kw |
| Engine | DV6A/U 90/110 PK |
| ETP # | OE # | Ref # | |
| CHRA | 660251 in stock | 49173-08760 | |
| Bearing Housing | 110171 in stock | 49173-20432 | |
| Shaft & Wheel | 260178 in stock | NA | |
| Compressor Wheel | 280306 in stock | 49173-00015 | |
| Back Plate | 310107 in stock | NA | |
| Heat Shield | 350118 in stock | NA | |
| Nozzle Ring Assembly | NA | ||
| Turbine Housing | 220135 in stock | NA | |
| Compressor Cover | 240131 in stock | NA | |
| Actuator | 390129 in stock | 49173-18850 | |
| Repair Kit and Components | |||
| Calibration Data | |||
| VSR Balance Calibration | - | ||
| T/hsg Angle | - | ||
| C/hsg Angle | - | ||
| Actuator Calibration 1 | P1-1mm -9 +/-1 kPA / P2-4mm -4 +/-3 kPA | ||
| Actuator Calibration 2 | - | ||
| Actuator Calibration 3 | - | ||
| ETP No. | 110171 |
| Turbo OE | 49173-07504 |
| Bearing Housing OE | 49173-20432 |
| Ref | |
| VNT or Non-VNT | NON |
| Oil or Water Cooled | Cooled OIL |
| Oil Inter(II) | |
| Turbine Housing Diameter(I) | 56 |
| ETP No. | 260178 |
| Turbo OE | 49173-07504 |
| Shaft & Wheel OE | NA |
| Ref | |
| Inducer Diameter(I) | 37 |
| Exducer Diameter(II) | 27.7 |
| Tip Height(III) | 4.7 |
| Journal Bearing Diameter(IV) | 6 |
| Comp Wheel Bore(V) | 4 |
| Number of Blades | 11 |
| Type Of Shaft | Straight |
| ETP No. | 280306 |
| Turbo OE | 49173-07504 |
| Compressor Wheel OE | 49173-00015 |
| Ref | |
| Inducer Diameter(III) | 29 |
| Exducer Diameter(IV) | 40 |
| Tip Height(II) | 4.1 |
| Total Height(I) | 18 |
| Number of Blades | 6 |
| Flatback / Superback(Trim) | Flatback |
| Shaft / Bore | 4 |
| ETP No. | 310107 |
| Turbo OE | 49173-07504 |
| Seal Plate & Back Plate OE | NA |
| Ref | |
| Plate Diameter(III) | - |
| Plate Diameter(II) | - |
| Plate Diameter(I) | 39.9 |
| Plate Depth(IV) | 10.7 |
| Plate Diameter(V) | 7.9 |
| Flatback / Superback | FLATBACK |
