Language:
| Turbo Model | GT2052V |
| Vehicle OE No | 8627752 |
| Model | V70 |
| Engine | NED5 |
| ETP # | OE # | Ref # | |
| CHRA | 703891-0029 | ||
| Bearing Housing | 722282-0067 | ||
| Shaft & Wheel | 434883-0014 | ||
| Compressor Wheel | 702492-0001 | ||
| Back Plate | 701335-0003 | ||
| Heat Shield | 443768-0003 | ||
| Nozzle Ring Assembly | NA | ||
| Turbine Housing | 712021-0007 | ||
| Compressor Cover | 715463-0005 | ||
| Actuator | 434855-0070 | ||
| Repair Kit and Components | |||
| Calibration Data | |||
| VSR Balance Calibration | 0.65G Max 0 -90,000rpm / 2.00G Max 90,000 -168,0 | ||
| T/hsg Angle | - | ||
| C/hsg Angle | - | ||
| Actuator Calibration 1 | 0 bar = 0 mm | ||
| Actuator Calibration 2 | 0.211 -0.216 bar = 0.5 -3.5 mm | ||
| Actuator Calibration 3 | 0.625 bar = Vanes Closed | ||
| ETP No. | |
| Turbo OE | 723167-0001 |
| Bearing Housing OE | 722282-0067 |
| Ref | |
| VNT or Non-VNT | - |
| Oil or Water Cooled | - |
| Oil Inter(II) | |
| Turbine Housing Diameter(I) | - |
| ETP No. | |
| Turbo OE | 723167-0001 |
| Shaft & Wheel OE | 434883-0014 |
| Ref | |
| Inducer Diameter(I) | 47 |
| Exducer Diameter(II) | 39.9 |
| Tip Height(III) | 8.3 |
| Journal Bearing Diameter(IV) | 7.9 |
| Comp Wheel Bore(V) | 5.1 |
| Number of Blades | 9 |
| Type Of Shaft | Straight |
| ETP No. | |
| Turbo OE | 723167-0001 |
| Compressor Wheel OE | 702492-0001 |
| Ref | |
| Inducer Diameter(III) | 38.6 |
| Exducer Diameter(IV) | 52 |
| Tip Height(II) | 4 |
| Total Height(I) | 26 |
| Number of Blades | 6 |
| Flatback / Superback(Trim) | Superback |
| Shaft / Bore | 5.1 |
| ETP No. | |
| Turbo OE | 723167-0001 |
| Seal Plate & Back Plate OE | 701335-0003 |
| Ref | |
| Plate Diameter(III) | 53.00 |
| Plate Diameter(II) | 100.2 |
| Plate Diameter(I) | 124 |
| Plate Depth(IV) | 12 |
| Plate Diameter(V) | 10 |
| Flatback / Superback | Superback |
