Language:
| Turbo Model | K03-1870EAA3.81KCAAD |
| Vehicle OE No | 28253019 |
| Model | Sharan TDI |
| Engine | ANU |
| ETP # | OE # | Ref # | |
| CHRA | 5303-710-0501 | ||
| Bearing Housing | 5304-150-0011 | ||
| Shaft & Wheel | 5303-120-5016 | ||
| Compressor Wheel | 5303-123-2011 | ||
| Back Plate | 5303-151-5701 | ||
| Heat Shield | 5303-165-2000 | ||
| Nozzle Ring Assembly | NA | ||
| Turbine Housing | 5303-100-9506 | ||
| Compressor Cover | 5303-101-5028 | ||
| Actuator | 5820-110-4126 | ||
| Repair Kit and Components | |||
| Calibration Data | |||
| VSR Balance Calibration | - | ||
| T/hsg Angle | - | ||
| C/hsg Angle | - | ||
| Actuator Calibration 1 | - | ||
| Actuator Calibration 2 | - | ||
| Actuator Calibration 3 | - | ||
| ETP No. | |
| Turbo OE | 5303-970-0036 |
| Bearing Housing OE | 5304-150-0011 |
| Ref | |
| VNT or Non-VNT | NON |
| Oil or Water Cooled | OIL |
| Oil Inter(II) | |
| Turbine Housing Diameter(I) | 62 |
| ETP No. | |
| Turbo OE | 5303-970-0036 |
| Shaft & Wheel OE | 5303-120-5016 |
| Ref | |
| Inducer Diameter(I) | 45 |
| Exducer Diameter(II) | 33 |
| Tip Height(III) | 6.3 |
| Journal Bearing Diameter(IV) | 7 |
| Comp Wheel Bore(V) | 4.6 |
| Number of Blades | 11 |
| Type Of Shaft | Slender |
| ETP No. | |
| Turbo OE | 5303-970-0036 |
| Compressor Wheel OE | 5303-123-2011 |
| Ref | |
| Inducer Diameter(III) | 32 |
| Exducer Diameter(IV) | 46 |
| Tip Height(II) | 3.2 |
| Total Height(I) | 25.6 |
| Number of Blades | 4 |
| Flatback / Superback(Trim) | Superback |
| Shaft / Bore | 4.6 |
| ETP No. | |
| Turbo OE | 5303-970-0036 |
| Seal Plate & Back Plate OE | 5303-151-5701 |
| Ref | |
| Plate Diameter(III) | 46.00 |
| Plate Diameter(II) | 71.7 |
| Plate Diameter(I) | 112.9 |
| Plate Depth(IV) | 16.8 |
| Plate Diameter(V) | 10 |
| Flatback / Superback | Superback |
