Language:
| Turbo Model | K04-2067CCB495.10BVAXK |
| Vehicle OE No | 070145701E |
| Model | Transporter TDI (T5) |
| Engine | AXD |
| ETP # | OE # | Ref # | |
| CHRA | 660221 in stock | NA | |
| Bearing Housing | 110158 in stock | NA | |
| Shaft & Wheel | |||
| Compressor Wheel | 280288 in stock | 5304-123-2034 | |
| Back Plate | 360146 in stock | 5304-151-5712 | |
| Heat Shield | 350117 in stock | NA | |
| Nozzle Ring Assembly | 370119 in stock | NA | |
| Turbine Housing | 220124 in stock | NA | |
| Compressor Cover | 240122 in stock | NA | |
| Actuator | 390118 in stock | NA | |
| Repair Kit and Components | |||
| Calibration Data | |||
| VSR Balance Calibration | 1.0G Max 0 -85,000rpm / 1.5G Max 85,000 -135,000 | ||
| T/hsg Angle | 180 | ||
| C/hsg Angle | 292.4 | ||
| Actuator Calibration 1 | - | ||
| Actuator Calibration 2 | - | ||
| Actuator Calibration 3 | - | ||
| ETP No. | 110158 |
| Turbo OE | 5304-970-0032 |
| Bearing Housing OE | NA |
| Ref | |
| VNT or Non-VNT | - |
| Oil or Water Cooled | - |
| Oil Inter(II) | |
| Turbine Housing Diameter(I) | - |
| ETP No. | |
| Turbo OE | |
| Shaft & Wheel OE | |
| Ref | |
| Inducer Diameter(I) | |
| Exducer Diameter(II) | |
| Tip Height(III) | |
| Journal Bearing Diameter(IV) | |
| Comp Wheel Bore(V) | |
| Number of Blades | |
| Type Of Shaft |
| ETP No. | 280288 |
| Turbo OE | 5304-970-0032 |
| Compressor Wheel OE | 5304-123-2034 |
| Ref | |
| Inducer Diameter(III) | - |
| Exducer Diameter(IV) | - |
| Tip Height(II) | - |
| Total Height(I) | - |
| Number of Blades | |
| Flatback / Superback(Trim) | - |
| Shaft / Bore | - |
| ETP No. | 360146 |
| Turbo OE | 5304-970-0032 |
| Seal Plate & Back Plate OE | 5304-151-5712 |
| Ref | |
| Plate Diameter(III) | 52.00 |
| Plate Diameter(II) | 85.2 |
| Plate Diameter(I) | 112.9 |
| Plate Depth(IV) | 16.75 |
| Plate Diameter(V) | 10 |
| Flatback / Superback | Superback |
