Language:
| Turbo Model | KP39-1875CCB426.18BVAXC |
| Vehicle OE No | 038253056F |
| Model | Polo TDI |
| Engine | ASZ (E3) |
| ETP # | OE # | Ref # | |
| CHRA | 660343 in stock | NA | |
| Bearing Housing | 110169 in stock | 5439-150-4007 | |
| Shaft & Wheel | 260173 in stock | 5439-120-5009 | |
| Compressor Wheel | 280302 in stock | 5443-123-2007 | |
| Back Plate | 310105 in stock | 5443-152-3005 | |
| Heat Shield | 350113 in stock | NA | |
| Nozzle Ring Assembly | NA | ||
| Turbine Housing | 5439-100-9576 | ||
| Compressor Cover | 5443-100-5006 | ||
| Actuator | 5825-110-5010 | ||
| Repair Kit and Components | |||
| Calibration Data | |||
| VSR Balance Calibration | 1.0G Max 0 -85,000rpm / 1.5G Max 85,000 -135,000 | ||
| T/hsg Angle | 90 | ||
| C/hsg Angle | 98 | ||
| Actuator Calibration 1 | Vaccuum -0.50 Bar = 11.8mm Rod Lift | ||
| Actuator Calibration 2 | - | ||
| Actuator Calibration 3 | - | ||
| ETP No. | 110169 |
| Turbo OE | 5439-970-0012 |
| Bearing Housing OE | 5439-150-4007 |
| Ref | |
| VNT or Non-VNT | - |
| Oil or Water Cooled | - |
| Oil Inter(II) | |
| Turbine Housing Diameter(I) | - |
| ETP No. | 260173 |
| Turbo OE | 5439-970-0012 |
| Shaft & Wheel OE | 5439-120-5009 |
| Ref | |
| Inducer Diameter(I) | - |
| Exducer Diameter(II) | - |
| Tip Height(III) | - |
| Journal Bearing Diameter(IV) | - |
| Comp Wheel Bore(V) | - |
| Number of Blades | |
| Type Of Shaft | - |
| ETP No. | 280302 |
| Turbo OE | 5439-970-0012 |
| Compressor Wheel OE | 5443-123-2007 |
| Ref | |
| Inducer Diameter(III) | 34.5 |
| Exducer Diameter(IV) | 46.0 |
| Tip Height(II) | 4.2 |
| Total Height(I) | 24.6 |
| Number of Blades | 6 |
| Flatback / Superback(Trim) | Superback |
| Shaft / Bore | 4.1 |
| ETP No. | 310105 |
| Turbo OE | 5439-970-0012 |
| Seal Plate & Back Plate OE | 5443-152-3005 |
| Ref | |
| Plate Diameter(III) | 46 |
| Plate Diameter(II) | - |
| Plate Diameter(I) | 46.75 |
| Plate Depth(IV) | 10.4 |
| Plate Diameter(V) | 10 |
| Flatback / Superback | Superback |
