Language:
| Turbo Model | GT1852V REA |
| Vehicle OE No | 07Z145874HV101 (Right Hand) |
| Model | Touareg Tdi |
| Engine | V10TDI |
| ETP # | OE # | Ref # | |
| CHRA | NA | ||
| Bearing Housing | NA | ||
| Shaft & Wheel | NA | ||
| Compressor Wheel | 702492-0011 | ||
| Back Plate | NA | ||
| Heat Shield | 433112-0001 | ||
| Nozzle Ring Assembly | 704013-0011 | ||
| Turbine Housing | 722501-0001 | ||
| Compressor Cover | NA | ||
| Actuator | 730314 | ||
| Repair Kit and Components | |||
| Calibration Data | |||
| VSR Balance Calibration | - | ||
| T/hsg Angle | - | ||
| C/hsg Angle | - | ||
| Actuator Calibration 1 | - | ||
| Actuator Calibration 2 | - | ||
| Actuator Calibration 3 | - | ||
| ETP No. | |
| Turbo OE | 755300-0005 |
| Bearing Housing OE | NA |
| Ref | |
| VNT or Non-VNT | - |
| Oil or Water Cooled | - |
| Oil Inter(II) | |
| Turbine Housing Diameter(I) | - |
| ETP No. | |
| Turbo OE | 755300-0005 |
| Shaft & Wheel OE | NA |
| Ref | |
| Inducer Diameter(I) | 44.5 |
| Exducer Diameter(II) | 40 |
| Tip Height(III) | 8.300000000000001 |
| Journal Bearing Diameter(IV) | 7.9 |
| Comp Wheel Bore(V) | 5.1 |
| Number of Blades | 9 |
| Type Of Shaft | slender |
| ETP No. | |
| Turbo OE | 755300-0005 |
| Compressor Wheel OE | 702492-0011 |
| Ref | |
| Inducer Diameter(III) | 36.8 |
| Exducer Diameter(IV) | 52 |
| Tip Height(II) | 3.7 |
| Total Height(I) | 26.1 |
| Number of Blades | 6 |
| Flatback / Superback(Trim) | superback |
| Shaft / Bore | 5.1 |
| ETP No. | |
| Turbo OE | 755300-0005 |
| Seal Plate & Back Plate OE | NA |
| Ref | |
| Plate Diameter(III) | - |
| Plate Diameter(II) | - |
| Plate Diameter(I) | - |
| Plate Depth(IV) | - |
| Plate Diameter(V) | - |
| Flatback / Superback | - |
