Language:
| Turbo Model | GT1646V (S3) |
| Vehicle OE No | 03G253016H |
| Model | Passat 2.0TDI 140PS |
| Engine | PQ35/46 Euro 4 |
| ETP # | OE # | Ref # | |
| CHRA | 660125 in stock | NA | |
| Bearing Housing | 110131 in stock | NA | |
| Shaft & Wheel | 260114 in stock | NA | |
| Compressor Wheel | 280240 in stock | NA | |
| Back Plate | 360114 in stock | NA | |
| Heat Shield | 350107 in stock | NA | |
| Nozzle Ring Assembly | 370133 in stock | NA | |
| Turbine Housing | 220106 in stock | NA | |
| Compressor Cover | 240105 in stock | NA | |
| Actuator | NA | ||
| Repair Kit and Components | |||
| Calibration Data | |||
| VSR Balance Calibration | - | ||
| T/hsg Angle | - | ||
| C/hsg Angle | - | ||
| Actuator Calibration 1 | - | ||
| Actuator Calibration 2 | - | ||
| Actuator Calibration 3 | - | ||
| ETP No. | 110131 |
| Turbo OE | 765261-0002 |
| Bearing Housing OE | NA |
| Ref | |
| VNT or Non-VNT | - |
| Oil or Water Cooled | - |
| Oil Inter(II) | |
| Turbine Housing Diameter(I) | - |
| ETP No. | 260114 |
| Turbo OE | 765261-0002 |
| Shaft & Wheel OE | NA |
| Ref | |
| Inducer Diameter(I) | 41 |
| Exducer Diameter(II) | 35.8 |
| Tip Height(III) | 8.1 |
| Journal Bearing Diameter(IV) | 7.9 |
| Comp Wheel Bore(V) | 5.1 |
| Number of Blades | 9 |
| Type Of Shaft | slender |
| ETP No. | 280240 |
| Turbo OE | 765261-0002 |
| Compressor Wheel OE | NA |
| Ref | |
| Inducer Diameter(III) | 34.1 |
| Exducer Diameter(IV) | 46 |
| Tip Height(II) | 4.1 |
| Total Height(I) | 25 |
| Number of Blades | 6 |
| Flatback / Superback(Trim) | deep superback |
| Shaft / Bore | 5.1 |
| ETP No. | 360114 |
| Turbo OE | 765261-0002 |
| Seal Plate & Back Plate OE | NA |
| Ref | |
| Plate Diameter(III) | - |
| Plate Diameter(II) | - |
| Plate Diameter(I) | - |
| Plate Depth(IV) | - |
| Plate Diameter(V) | - |
| Flatback / Superback | - |
