Language:
| Turbo Model | K03-2076CCB5.88KCAVD |
| Vehicle OE No | 35242092F |
| Model | NA |
| Engine | R425CP |
| ETP # | OE # | Ref # | |
| CHRA | NA | ||
| Bearing Housing | 5304-151-0003 | ||
| Shaft & Wheel | 5303-120-5010 | ||
| Compressor Wheel | 5304-123-2024 | ||
| Back Plate | 5304-151-5712 | ||
| Heat Shield | NA | ||
| Nozzle Ring Assembly | NA | ||
| Turbine Housing | 5303-100-9077 | ||
| Compressor Cover | 5304-100-5010 | ||
| Actuator | 5820-110-4173 | ||
| Repair Kit and Components | |||
| Calibration Data | |||
| VSR Balance Calibration | 1.0G Max 0 -85,000rpm / 1.5G Max 85,000 -135,000 | ||
| T/hsg Angle | 235 | ||
| C/hsg Angle | 305 | ||
| Actuator Calibration 1 | - | ||
| Actuator Calibration 2 | Pressure 1.3 Bar = 1.9mm Rod Lift | ||
| Actuator Calibration 3 | - | ||
| ETP No. | |
| Turbo OE | 5303-970-0046 |
| Bearing Housing OE | 5304-151-0003 |
| Ref | |
| VNT or Non-VNT | - |
| Oil or Water Cooled | - |
| Oil Inter(II) | |
| Turbine Housing Diameter(I) | - |
| ETP No. | |
| Turbo OE | 5303-970-0046 |
| Shaft & Wheel OE | 5303-120-5010 |
| Ref | |
| Inducer Diameter(I) | - |
| Exducer Diameter(II) | - |
| Tip Height(III) | - |
| Journal Bearing Diameter(IV) | - |
| Comp Wheel Bore(V) | - |
| Number of Blades | |
| Type Of Shaft | - |
| ETP No. | |
| Turbo OE | 5303-970-0046 |
| Compressor Wheel OE | 5304-123-2024 |
| Ref | |
| Inducer Diameter(III) | 38.5 |
| Exducer Diameter(IV) | 51 |
| Tip Height(II) | 4.5 |
| Total Height(I) | 25.6 |
| Number of Blades | 6 |
| Flatback / Superback(Trim) | Superback |
| Shaft / Bore | 4.6 |
| ETP No. | |
| Turbo OE | 5303-970-0046 |
| Seal Plate & Back Plate OE | 5304-151-5712 |
| Ref | |
| Plate Diameter(III) | 52 |
| Plate Diameter(II) | 85.2 |
| Plate Diameter(I) | 112.9 |
| Plate Depth(IV) | 16.75 |
| Plate Diameter(V) | 10 |
| Flatback / Superback | superback |
