Language:
| Turbo Model | 2674A354 |
| Vehicle OE No | 2674A098 |
| Model | Diverse |
| Engine | T4.40 |
| ETP # | OE # | Ref # | |
| CHRA | 660182 in stock | 2674A098 | |
| Bearing Housing | 2674A098 | ||
| Shaft & Wheel | 2674A098 | ||
| Compressor Wheel | 2674A098 | ||
| Back Plate | 2674A098 | ||
| Heat Shield | 2674A098 | ||
| Nozzle Ring Assembly | 2674A098 | ||
| Turbine Housing | 2674A098 | ||
| Compressor Cover | 2674A098 | ||
| Actuator | 2674A098 | ||
| Repair Kit and Components | |||
| Calibration Data | |||
| VSR Balance Calibration | - | ||
| T/hsg Angle | - | ||
| C/hsg Angle | - | ||
| Actuator Calibration 1 | - | ||
| Actuator Calibration 2 | - | ||
| Actuator Calibration 3 | - | ||
| ETP No. | |
| Turbo OE | 452222-0002 |
| Bearing Housing OE | 2674A098 |
| Ref | |
| VNT or Non-VNT | - |
| Oil or Water Cooled | - |
| Oil Inter(II) | |
| Turbine Housing Diameter(I) | - |
| ETP No. | |
| Turbo OE | 452222-0002 |
| Shaft & Wheel OE | 2674A098 |
| Ref | |
| Inducer Diameter(I) | - |
| Exducer Diameter(II) | - |
| Tip Height(III) | - |
| Journal Bearing Diameter(IV) | - |
| Comp Wheel Bore(V) | - |
| Number of Blades | |
| Type Of Shaft | - |
| ETP No. | |
| Turbo OE | 452222-0002 |
| Compressor Wheel OE | 2674A098 |
| Ref | |
| Inducer Diameter(III) | - |
| Exducer Diameter(IV) | - |
| Tip Height(II) | - |
| Total Height(I) | - |
| Number of Blades | |
| Flatback / Superback(Trim) | - |
| Shaft / Bore | - |
| ETP No. | |
| Turbo OE | 452222-0002 |
| Seal Plate & Back Plate OE | 2674A098 |
| Ref | |
| Plate Diameter(III) | - |
| Plate Diameter(II) | - |
| Plate Diameter(I) | - |
| Plate Depth(IV) | - |
| Plate Diameter(V) | - |
| Flatback / Superback | - |
