Language:
| Turbo Model | TB02 |
| Vehicle OE No | NA |
| Model | Ulysse -4 cyl. -2.1L -IDI D |
| Engine | XUD11 |
| ETP # | OE # | Ref # | |
| CHRA | 443854-0123 | ||
| Bearing Housing | 435349-0007 | ||
| Shaft & Wheel | 448941-0008 | ||
| Compressor Wheel | 410450-0013 | ||
| Back Plate | NA | ||
| Heat Shield | NA | ||
| Nozzle Ring Assembly | NA | ||
| Turbine Housing | 430609-0200 | ||
| Compressor Cover | 409589-0382 | ||
| Actuator | NA | ||
| Repair Kit and Components | |||
| Calibration Data | |||
| VSR Balance Calibration | 1.5G Max 0 -85,000rpm | ||
| T/hsg Angle | - | ||
| C/hsg Angle | - | ||
| Actuator Calibration 1 | - | ||
| Actuator Calibration 2 | - | ||
| Actuator Calibration 3 | - | ||
| ETP No. | |
| Turbo OE | 454113-0001 |
| Bearing Housing OE | 435349-0007 |
| Ref | |
| VNT or Non-VNT | - |
| Oil or Water Cooled | - |
| Oil Inter(II) | |
| Turbine Housing Diameter(I) | - |
| ETP No. | |
| Turbo OE | 454113-0001 |
| Shaft & Wheel OE | 448941-0008 |
| Ref | |
| Inducer Diameter(I) | - |
| Exducer Diameter(II) | - |
| Tip Height(III) | - |
| Journal Bearing Diameter(IV) | - |
| Comp Wheel Bore(V) | - |
| Number of Blades | |
| Type Of Shaft | - |
| ETP No. | |
| Turbo OE | 454113-0001 |
| Compressor Wheel OE | 410450-0013 |
| Ref | |
| Inducer Diameter(III) | 35.7 |
| Exducer Diameter(IV) | 48 |
| Tip Height(II) | 5.3 |
| Total Height(I) | 24.4 |
| Number of Blades | 6 |
| Flatback / Superback(Trim) | Superback |
| Shaft / Bore | 6.0 |
| ETP No. | |
| Turbo OE | 454113-0001 |
| Seal Plate & Back Plate OE | NA |
| Ref | |
| Plate Diameter(III) | - |
| Plate Diameter(II) | - |
| Plate Diameter(I) | - |
| Plate Depth(IV) | - |
| Plate Diameter(V) | - |
| Flatback / Superback | - |
