Language:
| Turbo Model | KP35-1570CBC180.85ACAXD |
| Vehicle OE No | 73501343 |
| Model | Passenger car |
| Engine | 1.25 SJTD |
| ETP # | OE # | Ref # | |
| CHRA | 660230 in stock | 5435-710-0503 | |
| Bearing Housing | 110163 in stock | NA | |
| Shaft & Wheel | 260169 in stock | NA | |
| Compressor Wheel | 280297 in stock | 5435-123-2005 | |
| Back Plate | 310103 in stock | 5435-152-3001 | |
| Heat Shield | 350112 in stock | NA | |
| Nozzle Ring Assembly | NA | ||
| Turbine Housing | 220126 in stock | 5435-100-9017 | |
| Compressor Cover | 240125 in stock | 5435-101-4808 | |
| Actuator | 390120 in stock | 5820-110-4311 | |
| Repair Kit and Components | |||
| Calibration Data | |||
| VSR Balance Calibration | 1.0G Max 0 -85,000rpm / 1.5G Max 85,000 -135,000 | ||
| T/hsg Angle | 189 | ||
| C/hsg Angle | 143 | ||
| Actuator Calibration 1 | Pressure 1.38 Bar = 2.0mm Rod Lift | ||
| Actuator Calibration 2 | - | ||
| Actuator Calibration 3 | - | ||
| ETP No. | 110163 |
| Turbo OE | 5435-970-0005 |
| Bearing Housing OE | NA |
| Ref | |
| VNT or Non-VNT | - |
| Oil or Water Cooled | - |
| Oil Inter(II) | |
| Turbine Housing Diameter(I) | - |
| ETP No. | 260169 |
| Turbo OE | 5435-970-0005 |
| Shaft & Wheel OE | NA |
| Ref | |
| Inducer Diameter(I) | 34.7 |
| Exducer Diameter(II) | 27.6 |
| Tip Height(III) | 5.3 |
| Journal Bearing Diameter(IV) | 6 |
| Comp Wheel Bore(V) | 4.1 |
| Number of Blades | 9 |
| Type Of Shaft | Straight |
| ETP No. | 280297 |
| Turbo OE | 5435-970-0005 |
| Compressor Wheel OE | 5435-123-2005 |
| Ref | |
| Inducer Diameter(III) | 26 |
| Exducer Diameter(IV) | 37 |
| Tip Height(II) | 3.9 |
| Total Height(I) | 21.8 |
| Number of Blades | 5 |
| Flatback / Superback(Trim) | Superback |
| Shaft / Bore | 4.1 |
| ETP No. | 310103 |
| Turbo OE | 5435-970-0005 |
| Seal Plate & Back Plate OE | 5435-152-3001 |
| Ref | |
| Plate Diameter(III) | 38 |
| Plate Diameter(II) | - |
| Plate Diameter(I) | 46.75 |
| Plate Depth(IV) | 10.4 |
| Plate Diameter(V) | 10 |
| Flatback / Superback | Superback |
