Language:
| Turbo Model | GT1544S |
| Vehicle OE No | 97FF6K682AB/D/E |
| Model | Mondeo (96-00) 1.8L D |
| Engine | RFN |
| ETP # | OE # | Ref # | |
| CHRA | 433289-0084 | ||
| Bearing Housing | 435793-0010 | ||
| Shaft & Wheel | 434712-0011 | ||
| Compressor Wheel | 436133-0002 | ||
| Back Plate | 700593-0001 | ||
| Heat Shield | NA | ||
| Nozzle Ring Assembly | NA | ||
| Turbine Housing | 434287-0018 | ||
| Compressor Cover | 434451-0005 | ||
| Actuator | 432340-0073 | ||
| Repair Kit and Components | |||
| Calibration Data | |||
| VSR Balance Calibration | 0.7G Max 0 -90,000rpm / 1.5G Max 90,000 -138,000 | ||
| T/hsg Angle | - | ||
| C/hsg Angle | - | ||
| Actuator Calibration 1 | - | ||
| Actuator Calibration 2 | - | ||
| Actuator Calibration 3 | - | ||
| ETP No. | |
| Turbo OE | 452124-0007 |
| Bearing Housing OE | 435793-0010 |
| Ref | |
| VNT or Non-VNT | - |
| Oil or Water Cooled | - |
| Oil Inter(II) | |
| Turbine Housing Diameter(I) | - |
| ETP No. | |
| Turbo OE | 452124-0007 |
| Shaft & Wheel OE | 434712-0011 |
| Ref | |
| Inducer Diameter(I) | - |
| Exducer Diameter(II) | - |
| Tip Height(III) | - |
| Journal Bearing Diameter(IV) | - |
| Comp Wheel Bore(V) | - |
| Number of Blades | |
| Type Of Shaft | - |
| ETP No. | |
| Turbo OE | 452124-0007 |
| Compressor Wheel OE | 436133-0002 |
| Ref | |
| Inducer Diameter(III) | - |
| Exducer Diameter(IV) | - |
| Tip Height(II) | - |
| Total Height(I) | - |
| Number of Blades | |
| Flatback / Superback(Trim) | - |
| Shaft / Bore | - |
| ETP No. | |
| Turbo OE | 452124-0007 |
| Seal Plate & Back Plate OE | 700593-0001 |
| Ref | |
| Plate Diameter(III) | 45.00 |
| Plate Diameter(II) | 84.15 |
| Plate Diameter(I) | 95 |
| Plate Depth(IV) | 12 |
| Plate Diameter(V) | 10 |
| Flatback / Superback | Superback |
