Turbo Model | GT1544S |
Vehicle OE No | XS4Q6K682BB |
Model | Focus Tdi 75HP (98-99) 1.8L D |
Engine | BHDA/BHDB |
ETP # | OE # | Ref # | |
CHRA | 433289-0066 | ||
Bearing Housing | 435793-0010 | ||
Shaft & Wheel | 433290-0042 | ||
Compressor Wheel | 436133-0003 | ||
Back Plate | 700593-0001 | ||
Heat Shield | NA | ||
Nozzle Ring Assembly | NA | ||
Turbine Housing | 434287-0016 | ||
Compressor Cover | 436569-0002 | ||
Actuator | 432340-0082 | ||
Repair Kit and Components | |||
Calibration Data | |||
VSR Balance Calibration | 0.65G Max 0 -90,000rpm / 2.00G Max 90,000 -168,0 | ||
T/hsg Angle | - | ||
C/hsg Angle | - | ||
Actuator Calibration 1 | - | ||
Actuator Calibration 2 | - | ||
Actuator Calibration 3 | - |
ETP No. | |
Turbo OE | 452244-0004 |
Bearing Housing OE | 435793-0010 |
Ref | |
VNT or Non-VNT | - |
Oil or Water Cooled | - |
Oil Inter(II) | |
Turbine Housing Diameter(I) | - |
ETP No. | |
Turbo OE | 452244-0004 |
Shaft & Wheel OE | 433290-0042 |
Ref | |
Inducer Diameter(I) | 42.3 |
Exducer Diameter(II) | 32.2 |
Tip Height(III) | 6 |
Journal Bearing Diameter(IV) | 7.9 |
Comp Wheel Bore(V) | 5.1 |
Number of Blades | 10 |
Type Of Shaft | Slender |
ETP No. | |
Turbo OE | 452244-0004 |
Compressor Wheel OE | 436133-0003 |
Ref | |
Inducer Diameter(III) | - |
Exducer Diameter(IV) | - |
Tip Height(II) | - |
Total Height(I) | - |
Number of Blades | |
Flatback / Superback(Trim) | - |
Shaft / Bore | - |
ETP No. | |
Turbo OE | 452244-0004 |
Seal Plate & Back Plate OE | 700593-0001 |
Ref | |
Plate Diameter(III) | 45.00 |
Plate Diameter(II) | 84.15 |
Plate Diameter(I) | 95 |
Plate Depth(IV) | 12 |
Plate Diameter(V) | 10 |
Flatback / Superback | Superback |