Language:
| Turbo Model | GT1544Z |
| Vehicle OE No | YS6Q6K682BC |
| Model | Fiesta Tdi / Tddi -4 cyl. -1.8L -DI D |
| Engine | Duratorq DI |
| ETP # | OE # | Ref # | |
| CHRA | 702315-0013 | ||
| Bearing Housing | 705966-0008 | ||
| Shaft & Wheel | 702541-0001 | ||
| Compressor Wheel | 707067-0003 | ||
| Back Plate | NA | ||
| Heat Shield | NA | ||
| Nozzle Ring Assembly | NA | ||
| Turbine Housing | 706628-0004 | ||
| Compressor Cover | 436614-0010 | ||
| Actuator | 436806-0006 | ||
| Repair Kit and Components | |||
| Calibration Data | |||
| VSR Balance Calibration | 0.65G Max 0 -90,000rpm / 2.00G Max 90,000 -168,0 | ||
| T/hsg Angle | 90 | ||
| C/hsg Angle | 179.5 | ||
| Actuator Calibration 1 | 1.21Bar-1.28Bar = 1.00mm | ||
| Actuator Calibration 2 | - | ||
| Actuator Calibration 3 | - | ||
| ETP No. | |
| Turbo OE | 703863-0002 |
| Bearing Housing OE | 705966-0008 |
| Ref | |
| VNT or Non-VNT | - |
| Oil or Water Cooled | - |
| Oil Inter(II) | |
| Turbine Housing Diameter(I) | - |
| ETP No. | |
| Turbo OE | 703863-0002 |
| Shaft & Wheel OE | 702541-0001 |
| Ref | |
| Inducer Diameter(I) | - |
| Exducer Diameter(II) | - |
| Tip Height(III) | - |
| Journal Bearing Diameter(IV) | - |
| Comp Wheel Bore(V) | - |
| Number of Blades | |
| Type Of Shaft | - |
| ETP No. | |
| Turbo OE | 703863-0002 |
| Compressor Wheel OE | 707067-0003 |
| Ref | |
| Inducer Diameter(III) | - |
| Exducer Diameter(IV) | - |
| Tip Height(II) | - |
| Total Height(I) | - |
| Number of Blades | |
| Flatback / Superback(Trim) | - |
| Shaft / Bore | - |
| ETP No. | |
| Turbo OE | 703863-0002 |
| Seal Plate & Back Plate OE | NA |
| Ref | |
| Plate Diameter(III) | - |
| Plate Diameter(II) | - |
| Plate Diameter(I) | - |
| Plate Depth(IV) | - |
| Plate Diameter(V) | - |
| Flatback / Superback | - |
