Language:
| Turbo Model | GT2552S |
| Vehicle OE No | 79054 |
| Model | Ranger Pickup -4 cyl. -2.5L -D |
| Engine | HS 2.5 |
| ETP # | OE # | Ref # | |
| CHRA | 451298-0010 | ||
| Bearing Housing | 433275-0002 | ||
| Shaft & Wheel | 434715-0013 | ||
| Compressor Wheel | 451584-0008 | ||
| Back Plate | 434689-0002 | ||
| Heat Shield | 434302-0001 | ||
| Nozzle Ring Assembly | NA | ||
| Turbine Housing | NA | ||
| Compressor Cover | 707931-0004 | ||
| Actuator | NA | ||
| Repair Kit and Components | |||
| Calibration Data | |||
| VSR Balance Calibration | 0.65G Max 0 -90,000rpm / 2.0G Max 90,000 -168,00 | ||
| T/hsg Angle | 125 | ||
| C/hsg Angle | 70 | ||
| Actuator Calibration 1 | - | ||
| Actuator Calibration 2 | - | ||
| Actuator Calibration 3 | - | ||
| ETP No. | |
| Turbo OE | 708258-0001 |
| Bearing Housing OE | 433275-0002 |
| Ref | |
| VNT or Non-VNT | NON |
| Oil or Water Cooled | OIL |
| Oil Inter(II) | |
| Turbine Housing Diameter(I) | 68 |
| ETP No. | |
| Turbo OE | 708258-0001 |
| Shaft & Wheel OE | 434715-0013 |
| Ref | |
| Inducer Diameter(I) | 47 |
| Exducer Diameter(II) | 40 |
| Tip Height(III) | 6.2 |
| Journal Bearing Diameter(IV) | 7.88 |
| Comp Wheel Bore(V) | 5.08 |
| Number of Blades | 12 |
| Type Of Shaft | Slender |
| ETP No. | |
| Turbo OE | 708258-0001 |
| Compressor Wheel OE | 451584-0008 |
| Ref | |
| Inducer Diameter(III) | - |
| Exducer Diameter(IV) | - |
| Tip Height(II) | - |
| Total Height(I) | - |
| Number of Blades | |
| Flatback / Superback(Trim) | - |
| Shaft / Bore | - |
| ETP No. | |
| Turbo OE | 708258-0001 |
| Seal Plate & Back Plate OE | 434689-0002 |
| Ref | |
| Plate Diameter(III) | 53.00 |
| Plate Diameter(II) | 87.2 |
| Plate Diameter(I) | 107.5 |
| Plate Depth(IV) | 12 |
| Plate Diameter(V) | 10 |
| Flatback / Superback | Superback |
