Language:
| Turbo Model | GT2049S |
| Vehicle OE No | 1S7Q6K682AK |
| Model | Mondeo TDDi 90 PS -4 cyl. -2.0L -DI D |
| Engine | Duratorq DI |
| ETP # | OE # | Ref # | |
| CHRA | 436731-0006 | ||
| Bearing Housing | 702372-0004 | ||
| Shaft & Wheel | 436504-0004 | ||
| Compressor Wheel | 436132-0003 | ||
| Back Plate | 700593-0003 | ||
| Heat Shield | NA | ||
| Nozzle Ring Assembly | NA | ||
| Turbine Housing | 436736-0008 | ||
| Compressor Cover | NA | ||
| Actuator | NA | ||
| Repair Kit and Components | |||
| Calibration Data | |||
| VSR Balance Calibration | 0.8G Max 0 -108,000rpm / 2.5G Max 108,000 -150,0 | ||
| T/hsg Angle | - | ||
| C/hsg Angle | - | ||
| Actuator Calibration 1 | - | ||
| Actuator Calibration 2 | - | ||
| Actuator Calibration 3 | - | ||
| ETP No. | |
| Turbo OE | 708618-0011 |
| Bearing Housing OE | 702372-0004 |
| Ref | |
| VNT or Non-VNT | - |
| Oil or Water Cooled | - |
| Oil Inter(II) | |
| Turbine Housing Diameter(I) | - |
| ETP No. | |
| Turbo OE | 708618-0011 |
| Shaft & Wheel OE | 436504-0004 |
| Ref | |
| Inducer Diameter(I) | 47 |
| Exducer Diameter(II) | 38.5 |
| Tip Height(III) | 6.3 |
| Journal Bearing Diameter(IV) | 7.9 |
| Comp Wheel Bore(V) | 5.1 |
| Number of Blades | 12 |
| Type Of Shaft | Slender |
| ETP No. | |
| Turbo OE | 708618-0011 |
| Compressor Wheel OE | 436132-0003 |
| Ref | |
| Inducer Diameter(III) | 34.7 |
| Exducer Diameter(IV) | 49 |
| Tip Height(II) | 4.5 |
| Total Height(I) | 24.8 |
| Number of Blades | 6 |
| Flatback / Superback(Trim) | Superback |
| Shaft / Bore | 5.1 |
| ETP No. | |
| Turbo OE | 708618-0011 |
| Seal Plate & Back Plate OE | 700593-0003 |
| Ref | |
| Plate Diameter(III) | 50.00 |
| Plate Diameter(II) | 91.25 |
| Plate Diameter(I) | 111 |
| Plate Depth(IV) | 12 |
| Plate Diameter(V) | 10 |
| Flatback / Superback | Superback |
