Language:
| Turbo Model | GT1749V |
| Vehicle OE No | 1S4Q6K682AF |
| Model | Focus TDCi 100&115PS -4 cyl. -1.8L -DI D |
| Engine | TDCi |
| ETP # | OE # | Ref # | |
| CHRA | 660133 in stock | 433395-0026 | |
| Bearing Housing | 110134 in stock | NA | |
| Shaft & Wheel | 260116 in stock | NA | |
| Compressor Wheel | 280233 in stock | NA | |
| Back Plate | 360112 in stock | NA | |
| Heat Shield | 350106 in stock | NA | |
| Nozzle Ring Assembly | 370107 in stock | 704013-0002 | |
| Turbine Housing | 220116 in stock | 706951-0005 | |
| Compressor Cover | 240108 in stock | NA | |
| Actuator | 390140 in stock | 714643-0003 | |
| Repair Kit and Components | |||
| Calibration Data | |||
| VSR Balance Calibration | 0.6G Max 0 -90,000rpm / 3.00G Max 90,000 -168,00 | ||
| T/hsg Angle | - | ||
| C/hsg Angle | - | ||
| Actuator Calibration 1 | - | ||
| Actuator Calibration 2 | - | ||
| Actuator Calibration 3 | - | ||
| ETP No. | 110134 |
| Turbo OE | 713517-0007 |
| Bearing Housing OE | NA |
| Ref | |
| VNT or Non-VNT | - |
| Oil or Water Cooled | - |
| Oil Inter(II) | |
| Turbine Housing Diameter(I) | - |
| ETP No. | 260116 |
| Turbo OE | 713517-0007 |
| Shaft & Wheel OE | NA |
| Ref | |
| Inducer Diameter(I) | - |
| Exducer Diameter(II) | - |
| Tip Height(III) | - |
| Journal Bearing Diameter(IV) | - |
| Comp Wheel Bore(V) | - |
| Number of Blades | |
| Type Of Shaft | - |
| ETP No. | 280233 |
| Turbo OE | 713517-0007 |
| Compressor Wheel OE | NA |
| Ref | |
| Inducer Diameter(III) | - |
| Exducer Diameter(IV) | - |
| Tip Height(II) | - |
| Total Height(I) | - |
| Number of Blades | |
| Flatback / Superback(Trim) | - |
| Shaft / Bore | - |
| ETP No. | 360112 |
| Turbo OE | 713517-0007 |
| Seal Plate & Back Plate OE | NA |
| Ref | |
| Plate Diameter(III) | - |
| Plate Diameter(II) | - |
| Plate Diameter(I) | - |
| Plate Depth(IV) | - |
| Plate Diameter(V) | - |
| Flatback / Superback | - |
