Language:
| Turbo Model | K04-2277DYB6.88GCCXK |
| Vehicle OE No | 55559850 |
| Model | Passenger car |
| Engine | Z20LEH |
| ETP # | OE # | Ref # | |
| CHRA | 5304-710-0516 | ||
| Bearing Housing | 5304-150-0037 | ||
| Shaft & Wheel | 5304-120-5018 | ||
| Compressor Wheel | 5306-123-2007 | ||
| Back Plate | 5304-151-5721 | ||
| Heat Shield | NA | ||
| Nozzle Ring Assembly | NA | ||
| Turbine Housing | 5304-100-9500 | ||
| Compressor Cover | 5304-100-5074 | ||
| Actuator | 5825-110-4192 | ||
| Repair Kit and Components | |||
| Calibration Data | |||
| VSR Balance Calibration | 1.0G Max 0 -85,000rpm / 1.5G Max 85,000 -135,000 | ||
| T/hsg Angle | - | ||
| C/hsg Angle | 82.5 | ||
| Actuator Calibration 1 | - | ||
| Actuator Calibration 2 | - | ||
| Actuator Calibration 3 | - | ||
| ETP No. | |
| Turbo OE | 5304-970-0049 |
| Bearing Housing OE | 5304-150-0037 |
| Ref | |
| VNT or Non-VNT | - |
| Oil or Water Cooled | - |
| Oil Inter(II) | |
| Turbine Housing Diameter(I) | - |
| ETP No. | |
| Turbo OE | 5304-970-0049 |
| Shaft & Wheel OE | 5304-120-5018 |
| Ref | |
| Inducer Diameter(I) | 50 |
| Exducer Diameter(II) | 44.5 |
| Tip Height(III) | 6.5 |
| Journal Bearing Diameter(IV) | 7 |
| Comp Wheel Bore(V) | 4.6 |
| Number of Blades | 12 |
| Type Of Shaft | Straight |
| ETP No. | |
| Turbo OE | 5304-970-0049 |
| Compressor Wheel OE | 5306-123-2007 |
| Ref | |
| Inducer Diameter(III) | - |
| Exducer Diameter(IV) | - |
| Tip Height(II) | - |
| Total Height(I) | - |
| Number of Blades | |
| Flatback / Superback(Trim) | - |
| Shaft / Bore | - |
| ETP No. | |
| Turbo OE | 5304-970-0049 |
| Seal Plate & Back Plate OE | 5304-151-5721 |
| Ref | |
| Plate Diameter(III) | - |
| Plate Diameter(II) | - |
| Plate Diameter(I) | - |
| Plate Depth(IV) | - |
| Plate Diameter(V) | - |
| Flatback / Superback | - |
