Language:
| Turbo Model | GT1549S |
| Vehicle OE No | 7700108052 |
| Model | Vivaro |
| Engine | F9Q718 |
| ETP # | OE # | Ref # | |
| CHRA | 660123 in stock | NA | |
| Bearing Housing | 433275-0002 | ||
| Shaft & Wheel | NA | ||
| Compressor Wheel | 706164-0003 | ||
| Back Plate | 700593-0003 | ||
| Heat Shield | 350104 in stock | 434302-0001 | |
| Nozzle Ring Assembly | NA | ||
| Turbine Housing | 220105 in stock | NA | |
| Compressor Cover | 240104 in stock | NA | |
| Actuator | 390107 in stock | 433483-0005 | |
| Repair Kit and Components | |||
| Calibration Data | |||
| VSR Balance Calibration | 0.7G Max 0 -90,000rpm / 1.5G Max 90,000 -138,000 | ||
| T/hsg Angle | - | ||
| C/hsg Angle | - | ||
| Actuator Calibration 1 | - | ||
| Actuator Calibration 2 | - | ||
| Actuator Calibration 3 | 0.410 bar = Valve Closed | ||
| ETP No. | |
| Turbo OE | 751768-0004 |
| Bearing Housing OE | 433275-0002 |
| Ref | |
| VNT or Non-VNT | NON |
| Oil or Water Cooled | OIL |
| Oil Inter(II) | |
| Turbine Housing Diameter(I) | 68 |
| ETP No. | |
| Turbo OE | 751768-0004 |
| Shaft & Wheel OE | NA |
| Ref | |
| Inducer Diameter(I) | 41.5 |
| Exducer Diameter(II) | 35.2 |
| Tip Height(III) | 7.1 |
| Journal Bearing Diameter(IV) | 7.88 |
| Comp Wheel Bore(V) | 5.08 |
| Number of Blades | 9 |
| Type Of Shaft | Slender |
| ETP No. | |
| Turbo OE | 751768-0004 |
| Compressor Wheel OE | 706164-0003 |
| Ref | |
| Inducer Diameter(III) | 34.7 |
| Exducer Diameter(IV) | 49 |
| Tip Height(II) | 4.5 |
| Total Height(I) | 24.8 |
| Number of Blades | 6 |
| Flatback / Superback(Trim) | Superback |
| Shaft / Bore | 5.1 |
| ETP No. | |
| Turbo OE | 751768-0004 |
| Seal Plate & Back Plate OE | 700593-0003 |
| Ref | |
| Plate Diameter(III) | 50.00 |
| Plate Diameter(II) | 91.25 |
| Plate Diameter(I) | 111 |
| Plate Depth(IV) | 12 |
| Plate Diameter(V) | 10 |
| Flatback / Superback | Superback |
