Language:
| Turbo Model | GT2052S |
| Vehicle OE No | 2674A351 |
| Model | 96 |
| Engine | 135TI |
| ETP # | OE # | Ref # | |
| CHRA | 660310 in stock | 451298-0042 | |
| Bearing Housing | 110110 in stock | 433275-0002 | |
| Shaft & Wheel | 260136 in stock | 434715-0039 | |
| Compressor Wheel | 280246 in stock | 451584-0007 | |
| Back Plate | 360102 in stock | 721085-0001 | |
| Heat Shield | 350104 in stock | 434684-0001 | |
| Nozzle Ring Assembly | NA | ||
| Turbine Housing | 436383-0001 | ||
| Compressor Cover | 704388-0001 | ||
| Actuator | NA | ||
| Repair Kit and Components | |||
| Calibration Data | |||
| VSR Balance Calibration | 1.5G Max 0 -138,000rpm | ||
| T/hsg Angle | - | ||
| C/hsg Angle | - | ||
| Actuator Calibration 1 | - | ||
| Actuator Calibration 2 | - | ||
| Actuator Calibration 3 | - | ||
| ETP No. | 110110 |
| Turbo OE | 727262-0001 |
| Bearing Housing OE | 433275-0002 |
| Ref | |
| VNT or Non-VNT | NON |
| Oil or Water Cooled | OIL |
| Oil Inter(II) | |
| Turbine Housing Diameter(I) | 68 |
| ETP No. | 260136 |
| Turbo OE | 727262-0001 |
| Shaft & Wheel OE | 434715-0039 |
| Ref | |
| Inducer Diameter(I) | 47 |
| Exducer Diameter(II) | 40 |
| Tip Height(III) | 6.2 |
| Journal Bearing Diameter(IV) | 7.88 |
| Comp Wheel Bore(V) | 5.08 |
| Number of Blades | 12 |
| Type Of Shaft | Slender |
| ETP No. | 280246 |
| Turbo OE | 727262-0001 |
| Compressor Wheel OE | 451584-0007 |
| Ref | |
| Inducer Diameter(III) | 38.3 |
| Exducer Diameter(IV) | 52 |
| Tip Height(II) | 4.8 |
| Total Height(I) | 26.1 |
| Number of Blades | 6 |
| Flatback / Superback(Trim) | Superback |
| Shaft / Bore | 5.1 |
| ETP No. | 360102 |
| Turbo OE | 727262-0001 |
| Seal Plate & Back Plate OE | 721085-0001 |
| Ref | |
| Plate Diameter(III) | 53.20 |
| Plate Diameter(II) | 87.2 |
| Plate Diameter(I) | 107.5 |
| Plate Depth(IV) | 11.4 |
| Plate Diameter(V) | 10 |
| Flatback / Superback | Superback |
