Language:
| Turbo Model | K03-1875EXA5.82KCAXD |
| Vehicle OE No | 0375C6, 037594 |
| Model | 306 |
| Engine | XUD9TE ECO |
| ETP # | OE # | Ref # | |
| CHRA | 5303-710-0505 | ||
| Bearing Housing | 5304-150-0004 | ||
| Shaft & Wheel | 5303-120-5014 | ||
| Compressor Wheel | 5303-123-2007 | ||
| Back Plate | 5304-151-5703 | ||
| Heat Shield | NA | ||
| Nozzle Ring Assembly | NA | ||
| Turbine Housing | 5303-100-9061 | ||
| Compressor Cover | 5303-101-5014 | ||
| Actuator | 5820-110-4087 | ||
| Repair Kit and Components | |||
| Calibration Data | |||
| VSR Balance Calibration | 1.0G Max 0 -85,000rpm / 1.5G Max 85,000 -135,000 | ||
| T/hsg Angle | 167 | ||
| C/hsg Angle | 271 | ||
| Actuator Calibration 1 | Pressure 1.6 Bar = 3.0mm Rod Lift | ||
| Actuator Calibration 2 | - | ||
| Actuator Calibration 3 | - | ||
| ETP No. | |
| Turbo OE | 5303-970-0010 |
| Bearing Housing OE | 5304-150-0004 |
| Ref | |
| VNT or Non-VNT | - |
| Oil or Water Cooled | - |
| Oil Inter(II) | |
| Turbine Housing Diameter(I) | - |
| ETP No. | |
| Turbo OE | 5303-970-0010 |
| Shaft & Wheel OE | 5303-120-5014 |
| Ref | |
| Inducer Diameter(I) | 45 |
| Exducer Diameter(II) | 38 |
| Tip Height(III) | 6.8 |
| Journal Bearing Diameter(IV) | 7 |
| Comp Wheel Bore(V) | 4.6 |
| Number of Blades | 11 |
| Type Of Shaft | Straight |
| ETP No. | |
| Turbo OE | 5303-970-0010 |
| Compressor Wheel OE | 5303-123-2007 |
| Ref | |
| Inducer Diameter(III) | 33.8 |
| Exducer Diameter(IV) | 44.9 |
| Tip Height(II) | 4.5 |
| Total Height(I) | 25.6 |
| Number of Blades | 4 |
| Flatback / Superback(Trim) | 1875 Superback |
| Shaft / Bore | 4\4 |
| ETP No. | |
| Turbo OE | 5303-970-0010 |
| Seal Plate & Back Plate OE | 5304-151-5703 |
| Ref | |
| Plate Diameter(III) | 46.00 |
| Plate Diameter(II) | 76 |
| Plate Diameter(I) | 112.9 |
| Plate Depth(IV) | 16.75 |
| Plate Diameter(V) | 10 |
| Flatback / Superback | Superback |
