Language:
| Turbo Model | GT1544S |
| Vehicle OE No | 038145701A |
| Model | A3 TDI 1.9L DI D |
| Engine | TDI 90 |
| ETP # | OE # | Ref # | |
| CHRA | 433289-0014 | ||
| Bearing Housing | 110110 in stock | 433275-0002 | |
| Shaft & Wheel | 260108 in stock | 433290-0042 | |
| Compressor Wheel | 280225 in stock | 433287-0004 | |
| Back Plate | 360111 in stock | 433254-0001 | |
| Heat Shield | 434302-0001 | ||
| Nozzle Ring Assembly | NA | ||
| Turbine Housing | 435788-0035 | ||
| Compressor Cover | 435791-0035 | ||
| Actuator | 433489-0004 | ||
| Repair Kit and Components | |||
| Calibration Data | |||
| VSR Balance Calibration | 0.65G Max 0 -90,000rpm / 2.00G Max 90,000 -168,0 | ||
| T/hsg Angle | 190 | ||
| C/hsg Angle | 118 | ||
| Actuator Calibration 1 | 0.77Bar-0.83Bar = 1.00mm movement | ||
| Actuator Calibration 2 | - | ||
| Actuator Calibration 3 | - | ||
| ETP No. | 110110 |
| Turbo OE | 454159-0001 |
| Bearing Housing OE | 433275-0002 |
| Ref | |
| VNT or Non-VNT | NON |
| Oil or Water Cooled | OIL |
| Oil Inter(II) | |
| Turbine Housing Diameter(I) | 68 |
| ETP No. | 260108 |
| Turbo OE | 454159-0001 |
| Shaft & Wheel OE | 433290-0042 |
| Ref | |
| Inducer Diameter(I) | 42.3 |
| Exducer Diameter(II) | 32.2 |
| Tip Height(III) | 6 |
| Journal Bearing Diameter(IV) | 7.9 |
| Comp Wheel Bore(V) | 5.1 |
| Number of Blades | 10 |
| Type Of Shaft | Slender |
| ETP No. | 280225 |
| Turbo OE | 454159-0001 |
| Compressor Wheel OE | 433287-0004 |
| Ref | |
| Inducer Diameter(III) | 33 |
| Exducer Diameter(IV) | 44 |
| Tip Height(II) | 4.5 |
| Total Height(I) | 22.3 |
| Number of Blades | 6 |
| Flatback / Superback(Trim) | Superback |
| Shaft / Bore | 5.1 |
| ETP No. | 360111 |
| Turbo OE | 454159-0001 |
| Seal Plate & Back Plate OE | 433254-0001 |
| Ref | |
| Plate Diameter(III) | 53.00 |
| Plate Diameter(II) | 96.15 |
| Plate Diameter(I) | 112.1 |
| Plate Depth(IV) | 12 |
| Plate Diameter(V) | 10 |
| Flatback / Superback | Superback |
